Product Profile:
 |
General Description:
An aliphatic polyisocyanate to be mixed with various alkyds to increase the
gloss, hardness and chemical resistance and to accelerate their drying,
curing and chemical cross-linking.
|
|
Common Usage:
This product may be used for applications where light exposures to acids,
alkalis, salt, most solvents and water is evident.
|
|
Color: Clear Amber |
|
Finish: Gloss |
Coating Systems:
|
Primer Coats:
After mixing J-1100 with the appropriate alkyd and properly preparing the
surface it may be used as a finish coat over alkyd primers, acrylics,
polyamide epoxies, urethanes, vinyls and direct to substrate. Suitable over
inorganic zinc primers provided a compatible intermediate coat, such as
Anchor Hi-Build Epoxy, is used first.
|
Surface Preparation:
|
Follow the surface preparations of the coating to which J-1100 is being added.
|
Technical Data:
|
Volume Solids: 64% |
|
Recommended Thickness: Follow the recommendations of the coating to which J-1100 is being added. |
|
Architectural and Industrial Maintenance Category: Not intended for residential use; Shop use only |
|
Actual V.O.C.: 2.61 lbs./gal. (313 g/l) |
|
Packaging: Pints and Gallons
|
|
Storage Temperature:
| Minimum 50 F |
|
Maximum 80F |
| J-1100 Polyurethane Hardener should be tightly sealed and stored where it is protected from heat, moisture, and foreign materials. Recommended storage temperatures are 50 - 80 F. Temperatures above this may cause material to polymerize or container to burst. It is recommended that the contents be used as soon as possible after opening as contamination may cause material to solidify. Storage life under normal conditions is one year. |
|
|
Health & Safety:
Refer to the front of this manual, the product label itself, and your Anchor representative concerning a Material Safety Data Sheet for complete information on this product. |
|
Mix Ratio: Thoroughly mix 8 parts paint portion with one part J-1100 hardener. |
|
Pot Life: 8 hours |
Application:
|
Application Equipment:
|
Airless Spray
Follow the recommendations of the coating to which J-1100 is being added.
|
|
|
Application Considerations:
Follow the recommendations of the coating to which J-1100 is being added.
The addition of more converter than recommended may shorten pot life and
cause coating to become excessively brittle. Not recommended for
submersion or for exposures where temperatures exceed more than 275 F
continuously.
|
Limited Warranty:
The technical data on this label or on other data is true and accurate to the best of our knowledge. We guarantee our products to conform to ANCHOR PAINT MFG. CO. quality control standards. Due to misuse in handling, storage, application and workmanship or variables such as weather or surface integrity that are beyond our control, Anchor Paint does not authorize any representative to make any warranty or merchantability of fitness of this product. Any liability whatsoever of Anchor Paint Mfg. Co. to the buyer or user of this product is limited to the purchaser’s cost of the product itself.
|
